Adhesive Remover Kits for Plastic Cleaners

Poly Prep is a surface etch and adhesion promoter used before bonding — it prepares low surface energy polymers like PTFE and HDPE for strong adhesive bonds. Debonder is used after bonding to dissolve and remove cured adhesive during rework, correction, or cleanup. They serve opposite stages of the bonding lifecycle.

For surface residue, adhesive softens quickly and can be wiped or scraped away shortly after application. For complete separation of bonded joints, immersion in the solvent may take a day or more depending on bond strength and joint size. Always work in a well-ventilated area during the process.

Yes. Both the Debonder and Poly Prep are available in multi-pack quantities and large volume sizes — up to 5 gallons for Poly Prep and 10-packs for Debonder — making them suitable for field technicians, production facilities, and high-volume bonding professionals requiring consistent, reliable adhesive management.

Yes. Both Poly Prep and the Debonder are explicitly compatible with PTFE and HDPE — two of the most difficult low surface energy polymers to treat. Poly Prep etches these surfaces for adhesion, while the Debonder safely removes cured bonding agents without damaging the underlying polymer substrate.

The Professional Kit includes a SI Bonding Agent (Blue, Black, or Green viscosity option), Poly Prep surface preparation, Activator/Accelerator, Filler for gap reinforcement, and a Debonder for clean removal. It covers the full bonding lifecycle and is suitable for field repairs, shop fabrication, and engineering prototypes on demanding substrates.

The Debonder should be used in a well-ventilated area. Poly Prep, as a solvent-based liquid, should be stored in a cool, dry place. Test both products on fine or sensitive finishes prior to full application. Contact Tech-Bond Global for SDS/MSDS documentation for detailed safety and handling information specific to each formulation.