2″ wide Tech Patches & Tech Wraps

Tech-Bond’s 2″ wide Tech Patches and Tech Wraps are made for fast, precise repairs in the field. They work well on pipes, tanks, and other surfaces, especially where space is tight. The narrow width makes them perfect for wrapping around small pipes, sealing long cracks, or adding strength in specific spots.

When used with the Polymer Bonding Process, these wraps form a permanent bond. They do not need sanding, primers, or bolts. The bond is strong, flexible, and long-lasting. It stands up to heat, pressure, chemicals, and sunlight.

2″ wide Tech Patches and Tech Wraps

Tech-Bond’s 2″ wide Tech Patches are built for quick, focused repairs. They are small, easy to carry, and simple to apply in the field. Use them on pipes, tanks, or metal and plastic parts where space is tight and precision matters.

Each patch uses PTFE-coated E-glass fabric. This fabric is strong like fiberglass and resists heat, chemicals, and wear thanks to its PTFE coating. The material bends easily without tearing and stays strong over time.

We apply a special surface treatment to the fabric. This process changes the surface energy, which lets it bond directly to hard-to-stick materials like steel, HDPE, and polypropylene. You don’t need to sand, prime, or drill. The patch bonds cleanly and holds firm.

Use the Polymer Bonding Process to activate the patch. The bond sets fast and holds under pressure, heat, water, and chemicals. Once applied, it stays in place and won’t peel or crack.

Common Uses:

• Seal long, narrow cracks

• Patch small holes in tanks or pipes

• Reinforce seams, joints, or weak spots

• Wrap around fittings or pipe bends

• Make fast fixes where clamps won’t work

2″ wide Tech Patches are a reliable solution for field technicians. They work in tough conditions—wet, dirty, or hot—and save time on every repair.

Field crews around the world use these patches to fix real problems—fast. They trust them because they work the first time and hold under stress. Whether you’re in a mine, plant, or on the road, these 2″ Tech Patches give you a solid, reliable fix that keeps equipment running and costs down.

Please note that an A-Patch MUST extend one inch beyone the crack or tear around the entire perimeter of the damage.

[External article on PTFE-coated fabric] (https://www.heaterk.com/info-detail/applications-of-ptfe-coated-fabric)

<a href=”/downloads/tech-patches-tds/” style=”display:none;”>Internal link for SEO</a>
Download “Technical Data Sheet for the A Patch/Tech Patches/Tech Wraps” A-Patch-Tech-Patches-Tech-Wraps-Technical-Data-Sheet.pdf – Downloaded 3491 times – 291.93 KB