Tech Patch and Tech Wrap Kits for Plastic Pipes & Tanks

Tech Patch – the number shown is the width of the Patch.  You choose the length from a drop down menu once you choose the width.

How to choose the correct size patch for your problem.

Before applying your Tech-Patch, measure the hole or crack.  The A-Patch should extend one inch beyond the damaged area on all sides.  Below are the numbers for the width of the patch.  For example, if you have a one inch holes, you would want to double click on the 3″ square.

When you get to the next page, there is a drop down menu, where you choose the length of the patch needed.  In our example, click on 3″ line. Each Tech-Patch Kit comes with the proper amount of Bonding Agent, Accelerator and Poly Prep you will need to apply the patch or wrap.

Detailed instructions are also available.  It is usually helpful to go to our video page to watch one of our videos.  If you have questions, contact us at: [email protected]

Please store your Tech-Bond Kit in the refrigerator. To use it, you will need to let the kit to get to room temperature. Thank you for your support.  Please be sure to leave a review.